Even though you generally don’t think about including your television in your cleaning regimen, dust and fingerprints accumulate on them over time, and the accumulation happens slowly enough that it’s difficult to detect. However, we assure you that cleaning your TV for ten minutes will result in a much more fulfilling movie-watching experience. We asked two cleaning specialists what their preferred technique was for cleaning TV screens of all kinds, from CRT to OLED. These are all the procedures and advice they suggest for a screen that looks flawless.
Read also: Steps For Clearing Out The Garage Thoroughly
The Frequency of TV Screen Cleaning
Try to clean your TV once a week to avoid buildup from forming on the screen. Keeping your TV screen clean can help it last longer and provide you with the best picture possible—dust, fingerprints, and smudges should all be removed. It can significantly alter how your TV looks and how the image appears on screen.
Furthermore, remove any fingerprints or smudges as soon as possible. You can extend the life of your TV and maintain the quality of the screen by cleaning it on a regular basis and using the right solutions.
Considerations Before You Get Started
For any special considerations or guidelines the manufacturer recommends for cleaning your TV, consult the owner’s manual. If there is a current warranty, this step is especially crucial.
Furthermore, it is strongly discouraged to use store-bought glass cleaners (such as Windex) on flatscreen TVs. These products include harsh substances like ammonia and alcohol that might harm the screen’s panels. To be sure these substances aren’t included in store-bought screen cleaners, always read the labels.
How to Use Commercial Spray or Rubbing Alcohol to Clean TV Screens
You can use the method below to clean any flatscreen TV, regardless of the kind you own. There is also an explanation of how CRT TVs are cleaned.
Power Down
Make sure your TV is off before using any dust cloths or cleaning supplies. You can unplug the TV if you’d like to be even more cautious, but most modern TV models don’t require that. Turning off the TV is better for safety reasons, but it also makes any smudges or streaks on the screen easier to see.
Dust the Screen
Don’t omit this crucial step. Not dusting the TV’s screen before applying a cleaning solution is a major cleaning mistake. Tiny scratches may result from this, gradually lowering the quality of the image.
By clearing away any dried material, you can prevent unintentionally scratching the screen by scraping a hard fragment of dirt or buildup into it.
Use a soft cloth that is safe for screens, such as microfiber. Paper towels and comparable wipes are very rough. How to do it is as follows:
Using extended swipes, lightly dust the entire screen.
To get rid of all the dust, pet hair, and other loose particles, turn the towel over or grab another one if necessary.
Additionally, clean the wires and speakers.
Use a Screen-Safe TV Cleaner
A tiny bit of screen-friendly cleaning is all you need—using too much could result in moisture damage. It is recommended to apply all wet cleansers onto a cloth and then wipe the TV with it. Direct screen spraying might leave behind difficult-to-remove stains. You run the danger of breaking the speakers too.
After confirming that the cleanser is safe for the particular kind of screen you are cleaning, take these steps:
- Wipe off the TV using a steady back-and-forth motion after lightly misting a soft cloth with a small amount of screen-friendly cleaning solution; never spray directly onto the screen.
- To get rid of greasy spots or fingerprint smudges, repeat as needed.
- Don’t forget to give the TV’s base and top a gentle cleaning as well.
How to Maintain TV Screens Made of CRT (Cathode Ray Tube)
Alcohol works well for cleaning CRT TV screens; a spray cleaning solution is not necessary. Because these screens are a little more stronger, you can make a cleaning solution by combining equal parts rubbing alcohol and warm water.
Wipe the entire screen, base, and top using a soft cloth and a small bit of solution.”
Clean Smudges Off the Screen
Check for particular areas of streaks, smudges, fingerprints, and similar materials after cleaning the entire screen. Some would need to be cleaned a bit further, but gently. Use a microfiber cloth to gently remove fingerprints by rubbing in a circular motion.
Avoid applying excessive pressure on harder areas, especially on displays that are more fragile. I suggest dampening the cloth with a little warm water and using it to clean the area if using a microfiber cloth for spot cleaning doesn’t work.
Dry the TV
Turn the TV back on only after letting the screen air dry completely. This should not need more than fifteen minutes; failure to complete this step could damage the electrical device.
How to Keep Your TV Remote Control Clean
Remember to clean your TV remote as well, since it can gather dust, bacteria, and germs. To clean and sterilize a TV remote, all you need to do is use a disinfectant wipe to remove any residue, dirt, or fingerprints.
Take out the batteries
To avoid the remote accidentally changing the TV settings while you wipe the buttons, it’s a good idea to take the batteries out of the device first. As an alternative, you might move the remote to another room and clean it there.
Wipe the Remote
Clean the distance in every place. Grunge tends to gather between the buttons, so take some time to clean them. To prevent moisture from getting inside the remote control, make sure the cleaning wipe is slightly moist but not completely wet.
Dry the Remote
Before using the TV remote again, let it air dry completely. Since moisture can encourage the growth of bacteria, you shouldn’t leave it on the remote.
Read also: How to Clean a Yoga Mat Without Harsh Chemicals