Crushed and burned limestone is used to make limewash, a form of paint. After that, the limestone and water are combined to create a limestone putty that can be used on the house’s walls. To create a variety of colors, manufacturers will blend various natural pigments into the limewash.
This kind of paint produces a distinctive matte finish that gives the walls depth and texture, making it a fantastic method to update your house.
Read also: How To Clean Walls Without Ruining The Paint
How to Limewash Walls For the Best Result
Get the Space Ready
To begin cleaning the walls of dirt, dust, grease, and other debris, take out any furniture, appliances, or floor coverings. Then, use a solution of mild soap and warm water.
After the walls are clean, place a drop cloth on the floor and use painter’s tape to tape off any edges—such as the ceiling, baseboards, doorframes, and window frames—that you do not want to paint. While working, take off the faceplates from the electrical outlets and cover them with a piece of painter’s tape.
Prime the walls
Both freshly painted and previously painted drywall should be primed. This will enhance the overall finish and help the limewash stick to the walls more effectively. However, if they haven’t been painted before, some masonry materials, like brick or stone, might be able to be painted with limewash straight away.
To find out how long the primer will take to dry, consult the manufacturer’s instructions.
Apply the First Coat of Limewash
Limewash paint can be mixed once the primer has dried. Since this kind of paint separates readily, you should mix it often while working. Apply the limewash beginning at one end of the walls after loading the flat or block brush with the ready-to-use mixed paint.
Move about the room and work in portions. Use a cross-hatch motion to feather out the paint and merge it with the margins of the previous part after applying most of the paint to the center of the new piece. then merge the paint with the edges of the preceding section by feathering it out with a cross-hatch technique. When applying limewash, thin coatings work best, so don’t aim for complete coverage on the first coat. Allow the paint to dry for approximately two hours after you are happy with the first layer before continuing.
Put the second layer of limewash on
You can apply a second coat of limewash using the same method once the first application has had enough time to dry to the touch. If required, you can apply a third coat after letting the second coat dry, but most walls only need two coats.
Clean Up
Pull up the drop cloth, take off the painter’s tape, and replace any electrical faceplates. After you are positive the paint is dry, move any appliances, furniture, or floor coverings back into the space.
Important Information Regarding Limewashing
Don’t dwell too much on errors. If your errors are not too big or noticeable, they will usually blend into the organic appearance of limewash paint, which has a tendency to organically provide a faulty appearance.
Work on each section separately. Blending the margins of dry limewash with new limewash without showing a visible seam gets harder. Work in portions to apply the limewash before the previous section dries to avoid this problem.
Read also: What Curtain Colour Goes With Tan Walls